Skip to Content

Sheet Laser Cutting up to 12 x 2.5 m: Nesting and File Checklist

November 19, 2026 by
Mostafa Morshedi

Nested parts laser-cut from a large steel sheet on the sheet laser cutting bed in Dubai

Long panels, base plates and large fabricated parts are often cut in two pieces and welded back together only because the cutting bed was too short. Our largest laser-cutting bed is 12,000 x 2,500 mm, and we also run a 6,000 x 2,000 mm bed, so many parts can be cut in one piece. This checklist helps you send a job that can be priced and cut without questions.

What we can cut

Mild steel up to 50 mm, stainless steel up to 40 mm and aluminium up to 30 mm. State the material and the thickness for every part, because the thickness decides how the part is cut.

Checklist for your files

  • Vector files at 1:1 scale. DXF or DWG for flat parts, STEP or IGES if you send a model. A PDF alone is not enough to cut from.
  • Clean geometry. Closed outlines, no duplicate or overlapping lines, text converted to outlines, cut lines on one layer and marking or notes on another.
  • One part, one name. Give each part a number and the quantity, and keep the same number on the drawing and in the file.
  • Material and grade for each part, and the surface that must stay clean if one face is visible.
  • Maximum part size. The maximum part size is the size of the cutting bed: up to 12,000 x 2,500 mm on our largest sheet bed and 6,000 x 2,000 mm on the second. State the overall size of every part, and tell us if a part is larger or has to be delivered in sections.
  • Bending after cutting. If parts are folded, add the bend lines and the bend length; bending is available up to 3,000 mm long.
  • Welding and finish. Say whether the parts go on to welding, and which finish you need, so it is priced in the first quote.

Laser-cut steel plates with bolt holes and etched part marks P19, P21, P52 and P54

Common file mistakes

The files we most often have to return are: a picture or a PDF instead of a vector file, a drawing that is not at 1:1 scale, open or duplicate lines, text that has not been converted to outlines, parts without a number or quantity, and a file without the material and thickness. Check these before you send and the quote comes back faster.

Optimised nesting

We optimise the layout of your parts on the sheet to use material well. You can send individual parts and let us nest them, or send your own nest if you have one. We check the files before cutting and tell you if a detail needs changing.

Quantity and delivery

One part, a batch or a repeat order, delivery site and date.

Send your files and we quote from them. Our management system is certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.

Send your drawings for a sheet laser cutting quote

Read more: our laser cutting service. Related: CNC bending.

Laser-Cut Facade Panels and Mashrabiya Screens: What to Specify Before You Request a Quote
Get a Quote طلب عرض أسعار