Stainless steel looks simple on a drawing and is easy to misquote. The grade, the finish and the way the parts are joined change the cost and the lead time more than most buyers expect. This guide lists what to specify before you ask for a price. The parts are cut, bent and welded in one workshop in Dubai Industrial City.
1. Name the grade and the finish, not just "stainless"
Different environments need different grades, so state the grade on the drawing. Grade 304 is the usual choice for indoor parts and for kitchens and food areas. Grade 316 is chosen where the part is exposed to coastal air, salt, pools or cleaning chemicals. Other grades exist; if you are unsure, tell us where the part will be used and we will discuss the options with you.
Also state the finish, because it changes how the part looks and how it is cut, welded and handled. We offer three:
- Brushed: fine, even lines in one direction. It hides fingerprints and small scratches, so it suits kitchens, cladding and handrails.
- Hairline: longer, finer continuous lines than brushed, for a smooth, sleek look.
- Mirror: a reflective polished surface. It shows every mark and weld, so mark the faces that must be mirror.
2. State the thickness for every part
Thickness decides how a part is cut and bent, and how it must be welded. A drawing that shows only the outline is not enough for a correct price.
3. Say which faces are visible
A visible face needs a defined surface finish and careful handling. A hidden face does not. Mark them, and give the finish you expect (for example brushed or plain).
4. Show the grain direction on brushed parts
If a brushed finish runs across a part when it should run along it, the part looks wrong even if it is dimensionally perfect. Mark the direction on the drawing.
5. Choose the welding process for the look you need
MIG welding suits structural parts and heavier sections. Laser welding puts less heat into the part, so thin or visible components distort less and the seam needs less finishing. Tell us which welds are structural and which are cosmetic.
6. Specify how the weld should look
Say whether each weld is visible or hidden and what appearance you expect, so it is priced in the first quote.
7. Give quantity and delivery
Prototype, one-off or repeat run, the delivery site and the date.
8. Send usable files
A DXF or DWG flat pattern or a STEP or IGES model, plus a PDF showing the finished part.
Cutting, bending and welding are done in one workshop, so one schedule covers all three. Our management system is certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
Send your drawings for a stainless steel fabrication quote
Read more: our steel and metal fabrication service. Related: laser cutting, bending, MIG welding.